AI agent access · Included with Link

Ask your AI agent about your drones.

Connect Claude, ChatGPT, Cursor, and other MCP clients to your SkyRelay account. Query live telemetry, analyze flight history, and inspect flight-controller parameters using natural language.

READ-ONLY OAUTH SECURED WORKS WITH YOUR GCS
AI assistant
Illustrative example
Is SC0042 online and ready to fly? Check its battery, GPS, and vibration.

SC0042 is online, with its flight controller connected and currently disarmed.

  • ● Battery: 23.4 V · 88% remaining
  • ● GPS: 3D fix · 14 satellites · HDOP 0.8
  • ● Vibration: OK · no accelerometer clipping

No issues appear in these checks. Use your normal preflight procedure before flying.

Your fleet, explained in plain language

SkyRelay gives your agent structured access to the data it needs—without custom integration code or manual dashboard checks.

Live vehicle health

Check battery, GPS and RTK fix quality, vibration, unhealthy sensors, armed state, flight mode, and firmware while the aircraft is online.

Recorded flight history

Summarize past flights, review tracks and mode changes, and inspect battery and GPS trends—even when the drone is switched off.

Configuration insight

Read live parameters or automatic backups saved at flight start. Compare settings between flights to investigate behavior changes.

What you can ask

Start with a device serial or name. Your agent can choose the appropriate tools and turn the results into an answer.

>“List my online drones and tell me if any have a low battery.”
>“Summarize the last flight for SC0042. How long did it fly and what was its maximum altitude?”
>“Check the vibration levels on SC0042 right now. Are they within ArduPilot’s guidance?”
>“Compare the BATT_ parameters from SC0042’s last two flight backups.”

Connect your AI agent

Use the remote MCP URL below. Your client will open SkyRelay’s sign-in and consent flow—no access token to copy.

SkyRelay MCP connector URL https://api.skyrelay.us/mcp

Streamable HTTP transport · OAuth 2.1 · drone:read scope

Before you start

  • A SkyRelay account and an MCP-compatible AI client.
  • Link service for each device you want to query. Track devices appear in the device list but cannot be queried.
  • For live answers, the Conduit must be online and its flight controller connected.

Three steps

  1. Add the connectorPaste the MCP URL into your client using its remote HTTP connector option.
  2. Sign in and approveAuthenticate with SkyRelay and approve read-only access to your Link drones.
  3. Ask a questionTry “List my devices” or one of the examples above.
Claude web or desktop
Go to Settings → Connectors → Add custom connector, paste the SkyRelay MCP URL, and complete the SkyRelay sign-in.
ChatGPT
Go to Settings → Apps & Connectors, create a connector with the SkyRelay MCP URL, and complete OAuth sign-in.
Claude Code

Add the server, then run /mcp to sign in:

claude mcp add --transport http skyrelay https://api.skyrelay.us/mcp
Cursor

Add this entry under mcpServers in mcp.json:

"skyrelay": { "url": "https://api.skyrelay.us/mcp" }
Kimi Code

Add the same skyrelay entry shown for Cursor to ~/.kimi-code/mcp.json for every project, or .mcp.json for one project. Start a new session, then approve sign-in when prompted or run /mcp-config login skyrelay.

Complete MCP tool reference

These are the exact tools available to your agent. Device arguments accept the serial shown in SkyRelay, such as SC0042, or the device name.

Fleet

No radio traffic
ToolWhat it returns
list_devices()Your Conduits with serial, name, service tier, online state, last seen, and whether a flight controller is connected.

Live drone data

Online drone + connected FC
Tool and argumentsWhat it returns
get_vehicle_status(device)Vehicle type, autopilot, firmware, armed state, flight mode, system status, unhealthy sensors, and battery summary.
get_battery(device)Pack and available per-cell voltages, current, consumed mAh, remaining percentage, temperature, charge state, and estimated time left.
get_gps(device)Fix type including RTK float/fixed, satellites, HDOP/VDOP, accuracy, position, and altitude for the first and optional second GPS.
get_vibration(device)Vibration per axis in m/s², an ok / high / severe assessment, and accelerometer clipping counts.
get_param(device, name)The current value of one flight-controller parameter, such as BATT_LOW_VOLT.
list_params(device, prefix?)All live parameters, optionally filtered by a prefix such as BATT_. A full download typically takes 10–30 seconds over cellular.

Recorded data

Works with the drone off
Tool and argumentsWhat it returns
list_flights(device, since?, limit?)Recorded flights, newest first: start/end, duration, distance, maximum altitude, takeoff/landing points, and parameter-backup availability. since is an ISO date or time; limit defaults to 20, maximum 50.
get_flight(flight_id)One flight’s summary plus battery and GPS statistics, mode changes, and up to 100 downsampled track points with altitude, speed, and battery.
get_param_backup(device, flight_id?, prefix?)Parameters automatically saved at flight start—the latest backup or one for a specific flight, with optional prefix filtering.

Safety and access

Your agent can inspect your data, not operate your aircraft.

  • Strictly read-only. No arming, flight commands, mode changes, or parameter writes.
  • OAuth secured. Clients request only the drone:read scope after your approval.
  • Account isolated. Agents can access only devices belonging to your SkyRelay account.
  • Link required per device. All per-device live and recorded tools require active Link service and a device that is not suspended.
  • You stay in control. Review or revoke agents anytime from Connected Apps.

Troubleshooting

Common responses and what to check next.

Device is offline

Check Conduit power and cellular connectivity. Recorded-data tools still work while the aircraft is off.

No reply from the flight controller

Confirm the flight controller is powered, connected to the Conduit, and configured for MAVLink.

MCP access requires the Link tier

Track devices are visible in list_devices, but their live and recorded per-device data requires Link.

No recorded telemetry or parameter backup

Check that the flight has finished recording. Not every flight controller reports every battery, GPS, or sensor field.

Ready to ask your fleet?

Connect your MCP client and get operational answers without clicking through dashboards.

Connect your AI agent →