Pick your device, then flash the latest firmware from your browser or download it. Release history and checksums are below.
Choose the board inside your Conduit. The T-SIM7600NA has the cellular modem built onto the board; the T-PCIE 16M carries it as a separate plug-in modem card. Your choice decides which build is installed and which updates your Conduit accepts later.
The browser can’t detect which board is connected — if the wrong build is flashed the device may not start, and you simply flash again with the right selection.
4If available, tap "Install" — the Conduit downloads and reboots automatically
Each Conduit only updates to firmware built for its own device — the one you selected when you flashed it (firmware 1.8.1 and later).
USB Flash
✓
In Chrome or Edge — use the Flash button above for one-click flashing
Or flash manually with esptool:
1Select your device above and download its .bin
2Connect Conduit via USB-C
3Flash with esptool: esptool.py write_flash 0x10000 firmware.bin
4Device reboots with new firmware
This replaces the application only. To set up a new board, switch device types, or recover a Conduit that won’t start, use the browser Flash button — it also writes the bootloader and partition layout for the device you selected.